Chimney Rebuilding in Billingshurst
Chimney rebuilding in Billingshurst for stacks that are leaning, badly cracked or falling apart at the top. We take the chimney down to sound brickwork and rebuild it, with a free quote first.
- 5 years in business
- Free, no-obligation quotes
- No call-out charge
- 24/7 emergency call-outs
Chimney rebuilding in Billingshurst
- 01
When a rebuild is needed
A rebuild makes sense when the stack is leaning, bricks are loose or flaking across large areas, or the top courses have broken up. At that point repointing only hides the problem. A leaning chimney can be a safety risk, so it's worth having it checked quickly.
- 02
Partial or full rebuild
Most rebuilds only take the stack down to the point where the brickwork is sound, often a few courses above the roof. A full rebuild down to roof level is needed when the damage runs deeper. We'll show you where the sound brickwork starts before quoting.
- 03
Keeping the look of your house
We reuse your original bricks where they're in good enough condition, and look for matching reclaimed bricks where they aren't. The pots, flaunching and pointing are finished to suit the house, so the rebuilt chimney looks like it has always been there.
What to expect from chimney rebuilding
After a close look at the stack, we give you a free quote setting out how far down it needs to come, which bricks can be reused and what access is needed. If the chimney is shared with a neighbour, we'll talk you through what needs agreeing first.
Once the scaffolding is up, we take the stack down brick by brick, clean the bricks we can reuse, and rebuild it with new mortar and a damp-proof tray where needed. Then we fit the flaunching, pots and flashing and clear everything away.
What's included
- Stack taken down to sound brickwork
- Good bricks cleaned and reused
- Matching reclaimed bricks where needed
- New flaunching and pots fitted
- New flashing where the stack meets the roof
How it works
Call or send a message
Tell us what's happening with your roof. We aim to respond the same day, and there's no call-out charge.
We inspect and quote
We look at the roof, explain what we've found in plain terms and give you a free, no-obligation quote.
Work done as agreed
We carry out the work we quoted for, then talk you through what we've done before we leave.
Chimney rebuilding questions
How much does a chimney rebuild cost in Billingshurst?
It depends on how many courses need rebuilding, the size of the stack, whether bricks can be reused and the scaffolding required. Rebuilding the top few courses is a much smaller job than taking a large stack down to the roofline. We give you a free quote first.
Do I need permission to rebuild a chimney in West Sussex?
Rebuilding a chimney to the same size and design usually doesn't need planning permission. Listed buildings and some conservation areas are different, so check with the council if that applies. If the stack is shared with next door, the Party Wall Act may apply, and your neighbour should agree first.
How long does it take to rebuild a chimney in Billingshurst?
Rebuilding the top of a typical stack usually takes a few days once the scaffolding is up. Larger chimneys, or ones that come down to roof level, take longer. New brickwork needs dry, frost-free days, so we plan around the forecast and give you a likely timescale with the quote.
Can a leaning chimney be straightened near Horsham?
Not usually. A chimney leans because the mortar on one side has weakened, often from the weather or chemical attack from flue gases, so pushing it back doesn't fix the cause. The safe answer is to take it down to sound brickwork and rebuild it straight.
Other chimney work in Billingshurst
We also offer:
Book chimney rebuilding in Billingshurst
Worried your chimney is leaning or falling apart? Call us and we'll check it and talk you through the options.